Star Trek (Bally, 1979): Troubleshooting and Bally MPU Replacement Boards
Is your Star Trek by Bally not starting, dead playfield lamps, partial displays, or stuck solenoids? These symptoms are typical of Bally microprocessor pinball machines whose original MPU board is now over 40 years old and almost always suffers from a leaking battery. The good news: the BallyFA replacement MPU board, Plug & Play and battery-free, brings your machine back to life.
Star Trek (Bally, 1979): Overview
Released in 1979, Star Trek is the first pinball machine based on the Star Trek franchise, a solid-state Bally with electronic sound. It uses the Bally MPU board (AS-2518 series).
- Manufacturer: Bally
- Year: 1979
- Electronic system: Bally MPU (AS-2518)
- Type: solid state
- Theme: Star Trek
Common Issues (Bally MPU)
On Bally microprocessor pinball machines (1977-1985), recurring failures stem from aging: leaking battery on the MPU (corrodes traces and sockets around U10/U11 — the #1 cause of dead boards), worn PIA 6821 chips (U10/U11) (oxidized pins, machine won't boot), failed 5101 RAM and sockets, oxidized or burnt MPU/power connectors (look for heat marks), displays with missing segments, and power supply/driver board (rectifier, fuses, solenoid transistors) needing attention.
Star Trek-Specific Issues (Forum Reports)
- CPU-controlled playfield lamps not working: often a lamp board or connector fault.
- All feature lamps dead: check lamp power bus / rectifier board connector (burnt pins).
- Leaking battery on MPU: corrosion around U10/U11.
- Dead or partial displays: check display power supply and MPU.
- Erratic or dead solenoids: driver board (transistors, fuses) needs servicing.
- Oxidized connectors: need replacing (re-pinning) to stabilize the machine.
Compatible Replacement Boards for Star Trek
- BallyFA — replacement MPU board (battery-free).
- BallyDri — power supply + driver board.
- BallyLa_60 — lamp driver board.
📚 Learn more: Guide: Which MPU board for a Bally (1977-1985)?
The BallyFA replaces the original MPU board (startup, game logic, battery-free memory) and eliminates the battery — the #1 cause of corrosion. For solenoids and power, the BallyDri takes over; lamps via the BallyLa_60. Installation is Plug & Play, battery-free, with free support. Contact us.
FAQ — Star Trek Bally
My playfield lamps won't light up.
Often the lamp board or a connector; the BallyLa_60 replaces the lamp driver, and the BallyFA stabilizes the logic.
My Star Trek won't start.
Check the battery and corrosion around U10/U11. The BallyFA replaces the MPU and runs without a battery.
Is the BallyFA compatible with my Bally?
Yes, for all Bally microprocessor machines (1977-1985). If in doubt, contact us.
Do I need to keep the original battery?
No. The BallyFA runs without a battery and eliminates the #1 cause of corrosion.
How long does installation take?
Installation is Plug & Play: just a few minutes, no soldering required, with tutorials and free support.
Does a battery-free board retain settings and high scores?
Yes. Modern replacement boards use NVRAM: no battery, no corrosion, and settings are preserved when powered off.
Step-by-Step Diagnostics
- With power off, visual inspection: look for any signs of battery leakage or corrosion on the MPU of your Star Trek; remove the original battery if still present.
- Power supply: measure voltages (especially 5V) and verify they reach the MPU; check the rectifier and power board fuses.
- MPU components: inspect the PIA 6821 chips (U10/U11) and the 5101 RAM, often corroded by battery leakage.
- Connectors: re-pin oxidized or burnt connectors, especially between the MPU and power supply.
- Displays: check display power supply; test with a known good display.
- Final test: verify startup, credits, solenoids, and displays; the BallyFA replaces the MPU battery-free; if needed, contact free support.
Useful Guides
- How much does pinball machine repair cost? A price guide
- How much is my pinball machine worth? Value and estimation
- Pinball machine leg sizes: the complete guide
- Which MPU board for a Bally (1977-1985)?
