Flash Gordon (Bally, 1981): Troubleshooting and Bally MPU Replacement Boards
Is your Flash Gordon by Bally not starting, no sound or voice, a silent multiball, or stuck solenoids? These symptoms are typical of Bally microprocessor pinball machines whose original MPU board is now over 40 years old and almost always suffers from a leaking battery. The good news: the BallyFA replacement MPU board, Plug & Play and battery-free, brings your machine back to life.
Flash Gordon (Bally, 1981): Overview
Released in 1981, Flash Gordon is Bally's first multi-level playfield and first game with the Squawk & Talk sound board, featuring multiball. It uses the Bally MPU board (AS-2518 series).
- Manufacturer: Bally
- Year: 1981
- Electronic system: Bally MPU (AS-2518)
- Type: solid state, multiball, multi-level playfield
- Theme: Flash Gordon / science fiction
Common Issues (Bally MPU)
On Bally microprocessor pinball machines (1977-1985), recurring failures stem from aging: leaking battery on the MPU (corrodes traces and sockets around U10/U11 — the #1 cause of dead boards), worn PIA 6821 chips (U10/U11) (oxidized pins, machine won't boot), failed 5101 RAM and sockets, oxidized or burnt MPU/power connectors (look for heat marks), displays with missing segments, and power supply/driver board (rectifier, fuses, solenoid transistors) needing attention.
Flash Gordon-Specific Issues (Forum Reports)
- No sound or voice: the Squawk & Talk board is diagnosed separately (ROMs, jumpers).
- Erratic multiball: check ball lock and trough switches.
- Leaking battery on MPU: corrosion around U10/U11.
- Dead or partial displays: check display power supply and MPU.
- Erratic or dead solenoids: driver board (transistors, fuses) needs servicing.
- Oxidized or burnt connectors: need replacing (re-pinning) to stabilize the machine.
Compatible Replacement Boards for Flash Gordon
- BallyFA — replacement MPU board (battery-free).
- BallyDri — power supply + driver board.
- BallyLa_60 — lamp driver board.
📚 Learn more: Guide: Which MPU board for a Bally (1977-1985)?
The BallyFA replaces the original MPU board (startup, game logic, battery-free memory) and eliminates the battery — the #1 cause of corrosion, including multiball logic. The Squawk & Talk sound board is diagnosed separately. For solenoids and power, the BallyDri takes over; lamps via the BallyLa_60. Installation is Plug & Play, battery-free, with free support. Contact us.
FAQ — Flash Gordon Bally
My Flash Gordon has no sound.
The Squawk & Talk board is diagnosed separately; the BallyFA stabilizes the MPU and game logic.
My Flash Gordon won't start.
Check the battery and corrosion around U10/U11. The BallyFA replaces the MPU and runs without a battery.
Is the BallyFA compatible with my Bally?
Yes, for all Bally microprocessor machines (1977-1985). If in doubt, contact us.
Do I need to keep the original battery?
No. The BallyFA runs without a battery and eliminates the #1 cause of corrosion.
How long does installation take?
Installation is Plug & Play: just a few minutes, no soldering required, with tutorials and free support.
Does a battery-free board retain settings and high scores?
Yes. Modern replacement boards use NVRAM: no battery, no corrosion, and settings are preserved when powered off.
Step-by-Step Diagnostics
- With power off, visual inspection: look for any signs of battery leakage or corrosion on the MPU of your Flash Gordon; remove the original battery if still present.
- Power supply: measure voltages (especially 5V) and verify they reach the MPU; check the rectifier and power board fuses.
- MPU components: inspect the PIA 6821 chips (U10/U11) and the 5101 RAM, often corroded by battery leakage.
- Connectors: re-pin oxidized or burnt connectors, especially between the MPU and power supply.
- Displays: check display power supply; test with a known good display.
- Final test: verify startup, credits, solenoids, and displays; the BallyFA replaces the MPU battery-free; if needed, contact free support.
Useful Guides
- How much does pinball machine repair cost? A price guide
- How much is my pinball machine worth? Value and estimation
- Pinball machine leg sizes: the complete guide
- Which MPU board for a Bally (1977-1985)?
