Blog o flipperach

Williams Pinball No Sound: Finding the Fault on...

Your Williams plays perfectly and says nothing. The sound board is a self-contained computer with its own fuses and its own power supply, so start there - then the select...

Williams Pinball No Sound: Finding the Fault on...

Your Williams plays perfectly and says nothing. The sound board is a self-contained computer with its own fuses and its own power supply, so start there - then the select...

Pinball Drop Targets Not Resetting: How to Find...

A drop target bank that stays down is usually a target switch, not a board. If it resets at game start but never mid-game, the coil and driver circuit are...

Pinball Drop Targets Not Resetting: How to Find...

A drop target bank that stays down is usually a target switch, not a board. If it resets at game start but never mid-game, the coil and driver circuit are...

Gottlieb System 80 Won't Boot: Display Shows 0,...

A Gottlieb System 80 that will not boot rarely needs a new CPU board. Two jumper wires in the interconnect harness carry logic ground and +5 V to the driver...

Gottlieb System 80 Won't Boot: Display Shows 0,...

A Gottlieb System 80 that will not boot rarely needs a new CPU board. Two jumper wires in the interconnect harness carry logic ground and +5 V to the driver...

Pinball General Illumination Not Working: Findi...

Playfield dark but the game still plays? General illumination is a plain 6.3 V AC loop fed straight off the transformer, on its own fuse, with no processor anywhere in...

Pinball General Illumination Not Working: Findi...

Playfield dark but the game still plays? General illumination is a plain 6.3 V AC loop fed straight off the transformer, on its own fuse, with no processor anywhere in...

Gottlieb System 1 Won't Boot: No Display, No St...

A Gottlieb System 1 that will not boot rarely needs a new CPU board. Two switches have to be closed before the game will start at all, a missing -12 volt...

Gottlieb System 1 Won't Boot: No Display, No St...

A Gottlieb System 1 that will not boot rarely needs a new CPU board. Two switches have to be closed before the game will start at all, a missing -12 volt...

Pinball Pop Bumper Not Working: How to Find the...

A pop bumper that has gone quiet is usually a worn skirt, a divot in the spoon or a tired coil sleeve — not a board. Here is the order...

Pinball Pop Bumper Not Working: How to Find the...

A pop bumper that has gone quiet is usually a worn skirt, a divot in the spoon or a tired coil sleeve — not a board. Here is the order...