Cosmic Gunfight (Williams, 1982): Troubleshooting and System 7 Replacement Boards
Is your Cosmic Gunfight by Williams has a drop-target bank that won't reset, a silent multiball, won't start, or no sound? These symptoms are typical of Williams System 7 pinball machines whose original boards (MPU, driver, power supply) are now over 40 years old. The good news: the WillFA7 replacement board, Plug & Play and battery-free, brings your machine back to life.
Cosmic Gunfight (Williams, 1982): Overview
Released in 1982, Cosmic Gunfight is a System 7 machine with 2-ball multiball, lane change, and three drop-target banks (about 1,008 units).
- Manufacturer: Williams
- Year: 1982
- Electronic system: Williams System 7
- Type: solid state, 2-ball multiball
- Theme: space western / science fiction
Common Issues (System 7)
On Williams System 3 to 7 pinball machines, recurring failures stem from aging: leaking NiCad battery on the MPU (corrosion — the #1 cause of dead boards), worn 40-pin MPU-to-driver connector (the single most common failure point), resets/reboots from 5V drops (power headers and connectors need re-soldering), tired power supply capacitors, displays with missing segments, and solenoid fuse blowing (stuck slingshot or pop bumper).
Cosmic Gunfight-Specific Issues (Forum Reports)
- Drop-target bank no longer resets/raises: the plunger or fork that lifts the three targets is often broken or missing, and the part is hard to find.
- Individual drop targets not registering: target switches to clean or adjust.
- 2-ball multiball won't start: lock and trough switches to check.
- Lane change inoperative: lane switches or logic to check.
- Resets or no startup: corroded battery and worn 40-pin connector, typical of System 7.
- No sound: System 7 sound board to diagnose (Sound Select signals on the MPU side).
Compatible Replacement Boards for Cosmic Gunfight
- WillFA7 — 2-in-1 board (MPU + Driver) compatible with System 3 to 7 (System 7 included).
The WillFA7 replaces the original MPU and driver board (startup, logic resets, solenoid and multiball control, battery-free memory) and eliminates the fragile 40-pin ribbon cable. Multiball mechanical adjustments, the power supply, and the sound board are addressed separately; our support team can guide you.
Installation is Plug & Play, battery-free, with tutorials and free support. Contact us.
FAQ — Cosmic Gunfight Williams
My drop-target bank won't reset.
The plunger/fork that lifts the three targets is often broken or missing (a hard-to-find part). Check the target switches too; the WillFA7 stabilizes solenoid control.
My multiball won't start.
Check the lock and trough switches. On the logic side, the WillFA7 stabilizes solenoid control and multiball.
Do I need to keep the original battery?
No. The WillFA7 runs without a battery and eliminates the #1 cause of corrosion on System 7 machines.
How long does installation take?
Installation is Plug & Play: just a few minutes, no soldering required, with tutorials and free support.
Does a battery-free board retain settings and high scores?
Yes. Modern replacement boards use NVRAM: no battery, no corrosion, and settings are preserved when powered off.
Step-by-Step Diagnostics
- With power off, visual inspection: look for any signs of battery leakage or corrosion on the MPU of your Cosmic Gunfight; remove the NiCad battery if still present.
- Power supply: check the 5V rail and fuses; re-solder power supply headers and MPU headers if voltage drops or the game resets.
- Connectors: re-pin oxidized Molex connectors, especially the MPU-to-driver connection.
- Solenoids: check solenoid fuses and switches (stuck slingshot) before powering back on.
- Displays: never connect or disconnect a display while powered on; test with a known good display.
- Final test: verify startup, credits, solenoids, and displays; remember the WillFA7 replaces MPU + driver. If needed, contact free support.
Useful Guides
- How much does pinball machine repair cost? A price guide
- How much is my pinball machine worth? Value and estimation
- Pinball machine leg sizes: the complete guide
- Which board for a Williams System 3 to 7?
See Also
- Warlok (Williams, 1982)
- Varkon (Williams, 1982)
- Barracora (Williams, 1981)
- Firepower II (Williams, 1983)
