Pinball Blog

Burnt Pinball Connectors: The Cause of Most Int...

Displays flickering, a solenoid firing on its own, a reset halfway through ball two? On a 1977-1989 Bally, Stern, Williams or Gottlieb machine the cause is usually a connector, not...

Burnt Pinball Connectors: The Cause of Most Int...

Displays flickering, a solenoid firing on its own, a reset halfway through ball two? On a 1977-1989 Bally, Stern, Williams or Gottlieb machine the cause is usually a connector, not...

Pinball Machine Keeps Blowing Fuses: How to Fin...

A fuse that blows once is bad luck. A fuse that blows again is telling you where the short is. Which fuse went, and how long it lasted, narrows the...

Pinball Machine Keeps Blowing Fuses: How to Fin...

A fuse that blows once is bad luck. A fuse that blows again is telling you where the short is. Which fuse went, and how long it lasted, narrows the...

GottFA80_Plus all-in-one replacement board for Gottlieb System 80 pinball machines

Playing the Herbstmeisterschaft? What to Look F...

The GPA-Herbstmeisterschaft 2026 runs 16–18 October at Insert Coins in Herne — over 1,000 m² of arcade, more than fifty pinball machines on free play, and a club that has...

Playing the Herbstmeisterschaft? What to Look F...

The GPA-Herbstmeisterschaft 2026 runs 16–18 October at Insert Coins in Herne — over 1,000 m² of arcade, more than fifty pinball machines on free play, and a club that has...

Pinball Flippers Not Working: Dead, Weak or Buz...

Both flippers dead, one flipper out, or weak and buzzing on a 1977-1989 Bally, Stern, Williams or Gottlieb? How the flippers fail tells you where to look: the flipper relay,...

Pinball Flippers Not Working: Dead, Weak or Buz...

Both flippers dead, one flipper out, or weak and buzzing on a 1977-1989 Bally, Stern, Williams or Gottlieb? How the flippers fail tells you where to look: the flipper relay,...

Bally Feature Lamps Not Working: Lamp Driver Bo...

Feature lamps dead, stuck on or flickering on a Bally or Stern from 1977-1985? Start with TP1 on the rectifier board, then work through fuse, bridge rectifier, SCRs, decoders and...

Bally Feature Lamps Not Working: Lamp Driver Bo...

Feature lamps dead, stuck on or flickering on a Bally or Stern from 1977-1985? Start with TP1 on the rectifier board, then work through fuse, bridge rectifier, SCRs, decoders and...

Pinball Switch Matrix Not Working: Dead Rows an...

A whole row of switches dead, or one reading closed that is not? The switch matrix fault patterns on Bally, Stern, Williams System 3-7 and Gottlieb System 1 and 80...

Pinball Switch Matrix Not Working: Dead Rows an...

A whole row of switches dead, or one reading closed that is not? The switch matrix fault patterns on Bally, Stern, Williams System 3-7 and Gottlieb System 1 and 80...

1 57

Pinballs Store

GottFA80_Plus — All-in-One CPU Board (replaces MPU + Driver + power supply) for Gottlieb System 80/80A/80B pinball

€349,00 EUR
€349,00 EUR
Sale Sold out
Taxes included.
View full details