Firepower II (Williams, 1983): common faults and System 7 replacement boards

June 26, 2026

Does your Williams Firepower II have its lane change down, fail to boot, reset or have no sound? These symptoms are typical of Williams System 7 pinball machines, whose original boards (MPU, Driver, power supply) are now over 40 years old. The good news: the WillFA7 replacement board, Plug & Play and battery-free, brings your machine back to life.

Firepower II (Williams, 1983): overview

Released in 1983, Firepower II is a Williams System 7 pinball machine, the sequel to the famous Firepower, on a military science-fiction theme. Designed by Mark Ritchie, it features 2-ball multiball, lane change and a ramp.

Manufacturer: Williams
Year: 1983
Electronic system: Williams System 7
Type: solid-state pinball, 2-ball multiball, lane change, ramp
Theme: science fiction / space

WillFA7 MPU/Driver board for Williams System 3 to 7 — The WillFA7 board replaces the original MPU and Driver of Williams System 3 to 7.

Common faults (System 7)

On Williams System 3 to 7, the recurring faults come from ageing: leaking NiCad battery on the MPU (corrosion, the No. 1 cause of dead boards), worn 40-pin MPU↔Driver connector (the best-known weak point), resets/reboots on a 5 V drop (power headers and connectors to be resoldered), tired power-supply capacitors, displays with missing segments, and a solenoid fuse that blows (slingshot or stuck bumper).

Issues specific to Firepower II (forum feedback)

Lane change only works in the shooter lane: often a switch-matrix fault (column 6) or a cut switch diode (row 6) to check.
Outhole solenoids stuck on: shorted transistors on the Driver board to replace.
Flipper coils: Firepower II uses 50 V coils; don't fit incorrect coils or you risk damaging the machine.
Temperamental LED bulbs: some positions (mystery, ramp extra ball) tolerate LEDs poorly; revert to original bulbs.
No boot or resets: corroded battery and worn 40-pin connector, typical of System 7.
No sound: System 7 sound board to be diagnosed.

Checking voltages with a multimeter on a Williams System 7 — A multimeter is used to check the 5 V and diagnose the boards of Williams System 7 machines.

Replacement boards compatible with Firepower II

WillFA7 — 2-in-1 board (MPU + Driver) compatible with System 3 to 7, System 7 included.

WillFA7 replacement board for Williams pinball — The WillFA7: Plug & Play installation, battery-free, with tutorials and free support.

📚 Further reading: Guide: which board for a Williams System 3 to 7?

The WillFA7 replaces the original MPU and Driver board (boot-up, logic resets, coil and multiball driving, battery-free memory) and removes the fragile 40-pin ribbon. The sound board and the mechanical parts (ramp, switches) must still be maintained separately; our support team will guide you.

Plug & Play installation, battery-free, free tutorials and support. Contact us.

FAQ — Firepower II Williams

My Firepower II's lane change only works in the shooter lane.
It's often a cut switch diode or a matrix fault (column/row). Once the mechanics are checked, the WillFA7 makes the logic and switch reading reliable.

My Firepower II won't boot or resets.
A corroded original battery and worn 40-pin connector are the No. 1 causes. The WillFA7 replaces the MPU and Driver and boots without a battery.

Is the WillFA7 compatible with System 7?
Yes. It covers System 3 to 7, System 7 included, and drives the logic, multiball and coils.

Should I keep the original battery?
No. The WillFA7 works without a battery and removes the No. 1 cause of corrosion on System 7.

How long does it take to install a replacement board?
Installation is Plug & Play: a few minutes, no soldering, with tutorials and free support.

Does a battery-free board keep the settings and high scores?
Yes. Modern replacement boards use non-volatile memory: no more battery, no more corrosion, and the settings are kept when powered off.

Step-by-step diagnosis

Powered off, visual inspection: look for any battery or corrosion trace on your Firepower II's MPU; remove the NiCad battery if it is still present.
Power supply: measure the 5 V and check it actually reaches the MPU and Driver (redo the power solder joints and connectors if the voltage drops); check the fuses.
Grounds and power connectors: resolder the tired headers between the boards to eliminate resets and reboots.
40-pin MPU↔Driver connector: re-pin the oxidised link with trifurcon pins, the No. 1 weak point of Williams System 7.
Displays: never plug or unplug a display while powered on; test with a known-good display.
Final test: check boot-up, credits, coils and displays; reminder: the WillFA7 replaces the MPU and Driver and boots without a battery. If needed, contact our free support.